Home > Error Occurred > Intel Matrix Storage Manager Error Occurred Raid 5

Intel Matrix Storage Manager Error Occurred Raid 5

Contents

or did you get around it by other means? I restartet and while windows startup a bluescreen occures and windows was broken. m 0 l Lumber-jack a b G Storage 5 January 2014 05:05:14 back up now before you attempt to do anything... All submitted content is subject to our Terms of Use. this content

Building a model to help me determine parameters of a physical water filter? Michael Daly wrote: > John wrote: > >> I wonder what the consequences will be by disabling a RAID controller? > > Since it's a RAID0 config, your drives will look And last time windows decided to do a check disk lost me a load of files. Indeed the 0 is the SATA device number which doesn't provide any good information unless you have multiple arrays.

Intel Rapid Storage Technology Raid Error Occurred (0)

Obviously the error is erroneous because the drive has been functioning with no problems at all. I haven't tried to sync the ipod becuase I have read of iPods being killed by this.How is yours working with version 7.1.1?Have you gotten any further? by tr_colo / March 16, 2007 11:41 AM PDT In reply to: Error Occurred (0) - Help Go to Intel Matrix Storage Console, select the drive (Port 0 or Port 1), Interaction between a predictor and its quadratic form?

In here the drives show the reported error as well. Dec 11, 2009 at 1:50 AM #18 DirectorC New Member Joined: Nov 4, 2009 Messages: 1,624 (0.64/day) Thanks Received: 268 Location: Florizy System Specs System Name: -= Son of a Whore there have been several additional Blue Screen shutdowns. (None with the iastor message.)Looking at the RAID configuration menu, the drive which was part of the original RAID1 setup is indicated as Ssd Error Occurred 0 Anyway: I installed the Intel Matrix Storage Manager which IS compatible with my hardware (even though my hardware was very old - from 2004).

I restarted the system and entered the RAID configuration menu. Raid 0 Error Occurred Is it possible to switch between these two or is the existing RAID setup exclusive to one of them? After that i have reinstalled Intel Rapid Storage Technology (RST) and fixed the error. https://www.cnet.com/forums/discussions/error-occurred-0-help-236344/ Anyway: I installed the Intel Matrix Storage Manager which IS compatible with my hardware (even though my hardware was very old - from 2004).

Vista was out for a year in beta and these companies had plenty of time to work on it. Error Occurred (0) Raid 1 Well for me its a sigh of relief - so far. Do I install this in Windows as any other App or do i have to do the F6 boot method? yup, i did that.

  • Flag Permalink Reply This was helpful (0) Collapse - What about us nVidia RAID users?
  • This is what threw me off.
  • John wrote: > I wonder what the consequences will be by disabling a RAID controller?
  • What does it mean?
  • Leave the disk in the DVD drive , you'll be booting from it in a minute.
  • The user guide is posted here: http://download.intel.com/support/chipsets/imsm/sb/imsm_reference1.pdf Like Show 0 Likes(0) Actions Go to original post Actions More Like This Retrieving data ...
Company Information | Support | Contact Us
  • I plug the cable into the left-most socket for drive 0 and I plug in drive 1 to the socket to the right.
  • Raid 0 Error Occurred

    I got an rma from WD, they replaced the drive and the replacement drive is still running in another system years later. http://superuser.com/questions/956113/repair-raid-after-bad-suspension-error-occurred-0 Upon the next reboot the problem has gone away - and has not come back since. Intel Rapid Storage Technology Raid Error Occurred (0) with in the "Matrix Storage Controller" I can mark it as a normal drive, but I believe that it just makes it ignore the problem it is finding and just pretends Raid 0 Error Occurred Fix Discussion topics include SSD, SATA drives, USB drives, external hard drives, RAID arrays, backup, IDE drives, network attached storage (NAS), thumbdrives, Western Digital, Kingston, LaCie, and SanDisk.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General

    I disable my raid before trying to overclock and use a 7th HDD so it don't get messed up. http://mttags.com/error-occurred/intel-matrix-storage-manager-error-occurred-0-raid-1.php Disabling one controller in BIOS will result in a boot error if you disable the one with the disks attached (no drives found or some such error). Reboot the pc into bios and change the sata mode to ahci. HDRDTD wrote: > It 'might' be that one of the drives has developed a SMART error. > [snip] > > My point is, One of the drives may have developed a Error Occurred (0) Hard Drive

    So how do you go to the Intel Matrix Storage Console when the system won't boot? Like so: http://i10.tinypic.com/2qvgtpt.jpg There are four SATA sockets there and you are using two of them. I have also just ran Mirrors Edge for a good 30 minutes and not a glitch happened. http://mttags.com/error-occurred/intel-matrix-storage-manager-raid-error-occurred.php Arno #13 (permalink) 02-17-2008, 12:56 PM KruseLudington Junior Member Join Date: Feb 2008 Posts: 1 I have figured out how to resolve this issue: First you should check

    Michael Daly wrote: > John wrote: > >> Intel ICH86/DO/DH SATA RAID Controller: >> Driver date: 5/11/06 >> Driver version: 6.0.0.1022 >> >> JMicron JMB36X Controller: >> Device type: SCSI and Raid 0 Error Occurred Windows 7 Since then, I have this error.Any suggestion?(sorry my poor english) Flag Permalink Reply This was helpful (0) Collapse - Cannot boot due to "error occurred(0)" by ivanthecat / October 2, 2009 It couldnt start the archiver and the system froze.

    Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor Does anyone have any suggestions on how I can resolve this error message? #2 (permalink)

    I will download win 8.1 drivers for my peripherals once I get the new machine. Main » Forums home All times are UTC - 5 hours [ DST ] Switch to mobile style Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group Connect with us Please turn JavaScript back on and reload this page. Raid Error On Boot Up More discussions in Chipsets All PlacesSupport CommunityChipsets 8 Replies Latest reply on Jul 9, 2013 11:37 AM by Diego_Intel Raid1 "Error Occurred(0)" on Good Drive After Replacing SMART Event Drive Jeff11

    More about : interpreting raid error intel matrix storage mgr sub mesa a c 127 G Storage 9 March 2010 20:46:59 Your RAID failed and you're getting new disks anyway. I can video podcast again. I don't see what that would have to do with data corruption from overclocking failure. http://mttags.com/error-occurred/intel-matrix-storage-manager-error-occurred-raid-1.php A monthy after I purchased the system, Gateway's higher end systems division was purchased by Micron, and then about a year later Micron declared bankruptcy.The only reason I mention that is

    m 0 l aamann 12 March 2010 04:43:58 I was able to fix this with sub mesa's guidance. Its also stopped the purchase of a second iPod for my girlfriend. Processor: i7 3930K @ 4Ghz Motherboard: Asus Rampage IV Extreme Black Edition Cooling: Custom, Liquid Cooled. solution SolvedCan't replace disk with larger disk in Raid 1 using Intel Rapid Storage solution SolvedMoved RAID 1 to new system and can't see drive under Intel Rapid Storage software solution

    Flag Permalink Reply This was helpful (0) Collapse - (NT) installed it in windows by totosquirt / September 5, 2007 3:15 PM PDT In reply to: Intel Matrix Storage Install Question One set is controlled by the Intel chipset and the other by the second controller. Lenovo driving me mad Hot Network Questions Are leet passwords easily crackable? If this is true I was wondering weather I could take an ISO image of my current system and then just get a new hard drive and then burn it to

    My daughter will finaly be able to hook up her iPod and I can play my old QuickTime video clip collection. Under status, the RAID VOLUME itself is running under "NORMAL" mode.Then...Under Port 0, the first drive's Type/Status reads: Member Disk (0)Under Port 1, the second drive's Type/Status reads: Error Occurred (0)After i forgot to mention that, along with the previous problems stated, it also fixed the Quicktime Playback solution (and the iTunes problem as well, since iTunes uses Quicktime to play the Then just look at which one the cables are plugged into.

    System Specs System Name: i7 Rig. Video Card(s): EVGA GTX770 Hard Disk(s): Samsung 840 256GB & Intel 510 128 GB SSD, LCD/CRT Model: Westinghouse 24" L2410NM and Samsung 226BW 22" Case: Cooler Master HAF-XM Power Supply: HX1000 It's stating 'Error Occurred' on 'Device Port 0' 'A drive in a RAID 0 volume is failing.