Home > Error Occurred > Intel Rapid Storage Technology Raid 0 Error Occurred

Intel Rapid Storage Technology Raid 0 Error Occurred

Contents

I had the same problem you all had and had the "Error Occured (0)" crap. Once reported, our moderators will be notified and the post will be reviewed. Disabling one controller in BIOS will result > in a boot error if you disable the one with the disks attached (no > drives found or some such error). One question though. this content

If the drives test good then enter the bios again and turn raid back on and make it the primary boot device. That was with a pair of 1st generation 300Gb Velociraptors, which are supposed to be among the most reliable of HDDs. Dec 6, 2009 at 5:59 AM #15 d3fct Joined: Jul 15, 2009 Messages: 1,087 (0.41/day) Thanks Received: 165 Location: Upstate NewYork System Specs System Name: no remorse Processor: i7 2600k @ by highcharity / April 7, 2007 3:23 AM PDT In reply to: CTRL - I issues A couple of months ago Quicktime froze my Vista machine and manually rebooting the pc https://communities.intel.com/thread/31393

Raid 0 Error Occurred (0)

Upon the next reboot the problem has gone away - and has not come back since. On rebooting there was an error shown within my RIAD array showing this. One set is controlled by the Intel chipset and the other by the second controller. Mike #7 (permalink) 01-07-2007, 08:57 PM John Guest Posts: n/a Re: "Error Occurred(0)" with RAID 0.

  • Then follow these steps to resolve the issue: Launch the Intel Matrix Storage Console software that you now have from the installation and open up the tree view to examine my
  • I will overclock my system in the future, but I just don't want to risk of this happening again if my overclock did effect this.
  • Looking at the Areca controllers, it still represents a serious investment to take that route, but I am accepting that it is inevitable.

Welcome, !! Just wanted to add that another user is having this problem. Do I install this in Windows as any other App or do i have to do the F6 boot method? Raid 0 Error Occurred Windows 7 This specific chipset (X79) uses the Intel® Rapid Storage Technology enterprise.https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22502&ProdId=3449&lang=eng&OSVersion=Windows%208*&DownloadType=DriversRegards.

Flag Permalink Reply This was helpful (0) Collapse - Intel Matrix Storage Install Question by Steve Mavronis / September 5, 2007 9:58 AM PDT In reply to: re: your email Thanks Anyone know any fixes/workarounds for nVidia motherboards? If I reboot, I get the same loop. If you have the motherboard manual (you can usually find one online at the manufacturer's website) you can determine which sockets are for which controller.

Dying disk. Raid Error On Boot Up Your options are restore from backup after you replace hardware, deal with the data loss as best you can, or get professional recovery services for your data before you mess with WD Life Guard found no problems, and nor did chkdsk run from Windows. Lenovo driving me mad Hot Network Questions How to install a replacement lock in a mailbox?

Raid 0 Error Occurred Fix

First, try unplugging and reseating the SATA cable to the drive in question or try a different SATA cable. http://www.wirelessforums.org/alt-comp-hardware/error-occurred-0-raid-0-what-does-mean-14336.html Then follow these steps to resolve the issue: Launch the Intel Matrix Storage Console software that you now have from the installation and open up the tree view to examine my Raid 0 Error Occurred (0) During that time it will not respond to instructions from the controller. Intel Matrix Storage Manager Error Occurred 0 Raid 1 I haven't tried to sync the ipod becuase I have read of iPods being killed by this.How is yours working with version 7.1.1?Have you gotten any further?

Vista was out for a year in beta and these companies had plenty of time to work on it. http://mttags.com/error-occurred/intel-matrix-storage-manager-error-occurred-0-raid-1.php No, create an account now. Flag Permalink Reply This was helpful (0) Collapse - Intel Matrix Storage Install Question by Steve Mavronis / September 4, 2007 1:53 PM PDT In reply to: What about us nVidia Maybe we can spot some problem. Ssd Error Occurred(0)

No problems were detected. This is what threw me off. > I backed everything up and I'll clone the dying drive to an identical > replacement. > I ran the Western Digital diagnostics again and Comment Submit Your Comment By clicking you are agreeing to Experts Exchange's Terms of Use. http://mttags.com/error-occurred/intel-rapid-storage-raid-error-occurred.php So from what others have said I believe I have to replace the broken hard drive.

John wrote: > I wonder what the consequences will be by disabling a RAID controller? Physical Disks Error Occurred 0 READ MORE © CBS Interactive Inc.  /  All Rights Reserved. All Rights ReservedTom's Hardware Guide ™ FAQ Search Login Register HDDGURU FILES Search: Unanswered | Active Main » Forums home All times are UTC - 5 hours [

Restarting the System no OS was found and the RAID system reported 3 of the 4 HDDs to have failed at the same time!

Windows clean boot, clean driver install, debug mode, etc. Flag Permalink Reply This was helpful (0) Collapse - Same Problem Here Pissed Off!!! Video Card(s): EVGA GTX770 Hard Disk(s): Samsung 840 256GB & Intel 510 128 GB SSD, LCD/CRT Model: Westinghouse 24" L2410NM and Samsung 226BW 22" Case: Cooler Master HAF-XM Power Supply: HX1000 Intel Matrix Storage Console DirectorC said: ↑ That means SMART encountered an error, which usually means you have bad sectors/clusters.

One of the OCZ's is what shows the error. Thanks Quote: Originally Posted by KruseLudington I have figured out how to resolve this issue: First you should check your hard drives (run a diagnostic utility) to make sure in fact I have two OSZ SSD drives in Raid (0) and another WD hard drive. http://mttags.com/error-occurred/intel-matrix-storage-manager-error-occurred-0-raid-0.php Mike Walsh alt.comp.hardware 1 07-27-2005 04:58 PM All times are GMT.

After shutting down iTunes, I go to the start menu, right click on the Intel Matrix, 'Open as administrator', open 'Advanced options', right-click on the drive in err, and select 'Set The computer, of course, couldn't boot but I was able to run the WD diagnostics from a bootable floppy for each separate HD. Related 1Re-Initialize RAID-0 in software after card failure0Momentary loss of RAID makes Windows 7 lose user accounts stored therein0Result of raid 0 with these two HDD2RAID 5 Recovery Reset CMOS and Michael Daly wrote: > John wrote: > >> Intel ICH86/DO/DH SATA RAID Controller: >> Driver date: 5/11/06 >> Driver version: 6.0.0.1022 >> >> JMicron JMB36X Controller: >> Device type: SCSI and

In my case, the drive was going bad and throwing SMART errors, but had not experienced any data loss. Only setup your raid when you 100% it's stable. I don't understand what Apple is doing (since that is the only software affecting this) to interfere with the Intel storage drivers in a RAID setup! I'm the Technical Marketing Manager here at StorageCraft.

Time will tell. Thanks for all your replies guys, it saved me from going getting another drive. Dec 4, 2009 at 5:30 PM #10 Conflict0s Joined: Dec 4, 2008 Messages: 399 (0.14/day) Thanks Received: 64 Location: United Kingdom. Will the operating system start?

Then follow these steps to resolve the issue: Launch the Intel Matrix Storage Console software that you now have from the installation and open up the tree view to examine my What does it mean? "Error Occurred(0)" with RAID 0. Ok, it seems to be something transitional. Featured Post Highfive Gives IT Their Time Back Promoted by Highfive Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to

Join Now For immediate help use Live now! Conflict0s says thanks. Is it possible to switch between these two or is the existing RAID setup exclusive to one of them? The array appears to function normally, and is fully backed up - some of it twice.

Indeed the 0 is the SATA device number which doesn't provide any good information unless you have multiple arrays. Arno #6 (permalink) 01-07-2007, 06:38 PM Michael Daly Guest Posts: n/a Re: "Error Occurred(0)" with RAID 0. Power Zone 1000W Mouse: Corsair Gaming CG M65 RGB Keyboard: Corsair Vengeance K70 Brown MX Software: Windows 7 Premium 64-Bit Hey guys, I have looked around google for my answers and